CALL 1.800.726.0108 or 701.742.2167 FOR CUSTOMER SERVICE.
EMAIL INFORMATION: svisto@vistoimplement.com
Seat material Vinyl
Seat spring Yes
Hour meter
Digital with pre-programmed service intervals
Cup holder Yes
Seat type 15" high back
Transmission type Hydrostatic
Transmission manufacturer Hydro-Gear
Transmission model EZT
Cutting width 46 in
Cutting width 116.84 cm
Cutting deck type Stamped, Reinforced
Cutting methods 3-in-1 Mulch/Rear Bag/Side Discharge Capable
Cutting deck material Steel
Deck thickness 13 gauge
Deck thickness 2.4 mm
Blade engagement Electric clutch
Blades 2 pcs
Blade-tip speed 16600 fpm
Blade-tip speed 84.33 m/s
Anti-scalp wheels 3
Deck lifting system Manual, hand operated
Spindle/mandrel type Cast Aluminum
Deck Wash Port Yes
Cutting height, max (approximate) 4 in
Cutting height, max (approximate) 101.6 mm
Cutting height, min (approximate) 1.5 inch
Cutting height, min (approximate) 38.1 mm
Engine manufacturer Briggs & Stratton
Engine name Endurance Series V-Twin
Power 23 hp
Cylinder displacement 44.18 cu.inch
Cylinder displacement 724 cm³
Cylinders 2
Fuel Type Gasoline
Fuel tank volume (with reserve) 3.5 gal (US)
Fuel tank volume (with reserve) 13.25 l
Fuel tank location Side (Single)
Weight 580 lbs
Weight 263.09 kg
Tire size, front Width 4 in
Tire size, front Diameter 11 in
Tire size, front Diameter wheel 5 in
Productivity 2.4 acres/hr
Productivity 9712.45 m²/h
Speed forward max 6.5 mph
Speed forward max 10.46 km/h
Speed forward min 0 mph
Speed forward min 0 km/h
Specifications
Air Induction
Water hose
Twin Engine
Steel Deck
Ready Start
Engine Manufacturer Kohler
Engine name Courage
Power 23hp
Cylinder displacement 725cc
Cylinder 2
Engine Cooling Air
Air Filter type Standard
Fuel Type Gasoline
Fuel tank volume (with reserve) 3.5 gal.
Fuel tank location Side(single)
Engine lubrication type Full pressure
Oil capacity 48 fl oz
Oil filter Yes
Transmission type Hydrostatic
Transmission manufacturer Hydro-Gear
Transmission model EZT
Pump displacement 10cc
Fan-cooled pumps Yes
Speed forward,min-max 0-6.5 mph
Speed reverse,min-max 0-3.5mph
Cutting width 46 inch
Cutting deck type Stamped
Cutting methods Collect/Mulch/Side ejection
Cutting deck material Steel
Deck thickness 13 gauge
Cutting height,min-max(approximate) 1.5-4inch
Cutting height steps 6
Blade engagement Electric clutch
Clutch rating 90ft lb.
Blades 2
Blade-tip speed 16600 fpm
Anti-scalp wheels 3
Deck lifting system Manual, hand operated
Powder-coated cutting deck Yes
Spindle/mandrel type Aluminum,vented
Greasable madrels Yes
ROPS Yes
Seat material Vinyl
Seat spring Yes
Seatback height Medium
Fuel level window Yes
Hour meter Digital
Cup holder Yes
Tire size,front 11x4-5"
Tire size,rear 18x8.5-8"
Wheelbase 43.8"
Base machine,length 75 inch
Base machine, width (chute down) 56 inch
Base machine width(chute up) 48 inch
Base machine height 40 inch
Weight 580lbs
Productivity 2.4 acres/hr
Homeowner Warranty 3 Year Limited
Commercial Warranty N/A
Air Induction Mowing Technology
Air is drawn from the top and bottom of the deck, improving grass lift and delivering a superior cut.
Water hose connection
Facilitates cleaning of the cutting deck. Attach the hose, turn on the water and start the engine and you will get a cleaner deck. For optimum results, clean the mower directly after use.
Endurance V-Twin Engine
Powered by Briggs and Stratton, this engine features premium air filtration, chrome plated valves, super finished bearing surfaces, and an oversized cooling fan for extreme durability and superior performance.
Reinforced steel cutting deck
The stamped cutting deck is reinforced with heavy flat-stock steel for added strength and durability on the leading edge and trim side. (Z254 shown)
Ready Start equipped
This unit features an automatic choke system to provide simplified starting with no user input required in normal starting conditions.
EMERY VISTO'S IMPLEMENT & CARQUEST - 1009 7TH STREET SOUTH - HWY 1 - OAKES, ND 58474